|
Weld Mold® 11-C
- A flux-coated electrode for most
aluminum alloys. A special combination of core wire and
extruded coating provides high-speed deposition of dense,
porosity-free welds with good color match. Weld deposits
cannot be heat treated or anodized.
Specification: AWS-E4043
Available forms: SMAW
 Spec
Sheet
Weld Mold® 41-B
- A bare cast iron gas-welding rod that provides excellent
color match and machinability. Being a true cast iron, it does
not produce hard spots caused by carbon migration as
conventional welding rods do. Use with Polyflux® 41.
Specification: NA
Available forms:
Oxy-Acetylene
 Spec
Sheet
Weld Mold® 56-B - A copper/silicon bare brazing alloy
with good flow, high strength and crack-resistance.
Recommended for thin galvanized steel and sheet metal such as
car-body repair. Also for fabrication and repair of silicon
bronze, copper alloys and grey or malleable iron.
Specification: AWS-ECuSi
Available forms: GTAW, GMAW,
Oxy-Acetylene
  Spec
Sheet
Polychamfer®
100 -
Buy on line Minimum
order (EL)
For
chamfering, beveling and gouging ferrous and non-ferrous
metals. Uses include weld preparation and removing old welds
and cracks.
Available forms:
SMAW
Spec
Sheet
Weld Mold® 4043
- A 5% silicon aluminum alloy that
flows freely at 1,000 Deg. F. with excellent properties, a
wide plastic range and mild corrosion-resistance. Cannot be
anodized.
Specification: AWS ER-4043
Available forms:
GTAW, GMAW,
Oxy-Acetylene
Spec
Sheet
Weld Mold® 5356
- A magnesium/aluminum alloy that flows
freely at 1,200 Deg. F. It can be used for welding most
aluminum grades and can be anodized.
Specification: AWS ER-5356
Available forms: GTAW, GMAW,
Oxy-Acetylene
Spec
Sheet
Weld Mold® 955 MCT – A bare rod used for the repair and
buildup of NAK-55 superior mold steel dies in the automotive,
home appliance, computer, camera, electronic and plastic film
extrusion industries. It may also be used to overlay working
areas of lesser alloys to provide a more wear resistant
surface.
Available form:
GTAW
Spec
Sheet
|
 |
Weld Mold® 26-C
- A flux-coated alloy with super capillary action and thin
flowing characteristics. Produces extraordinary tensile and
shear strength. Deep penetration of the grain boundaries on
the surface of the base metal without fusion permits
application with a minimum of heat and distortion.
Specification: AWS-BCuZn-A
Available forms:
Oxy-Acetylene
Spec
Sheet
Weld Mold® 42-C
- A flux-coated low-fuming bronze brazing rod for general
purpose applications. Provides excellent bonds on all metals
over rust and dirt. Excellent for either thin-flowing or
bead-forming applications. Also available as bare rod 42-B.
Specification: AWSR-CuZn-C
Available forms:
Oxy-Acetylene
Spec
Sheet
Weld Mold® 85-C
- A flux-coated brazing alloy that produces a relatively
tough alloy with an as-welded hardness of 220 BHN. The high
nickel content produces deposits that adhere to and penetrate
the grain boundaries of the base metal and produce excellent,
high buildups rather than flowing out. Preferred for joining
where poor fit-up is encountered.
Specification: AWS-RBCuZn-D
Available forms:
Oxy-Acetylene
Spec
Sheet
Polycut® 101
-
For cutting and
piercing mild and alloy steel, stainless steel, cast iron,
bronze, aluminum and copper. Uses include removing frozen
bolts, piercing new holes and enlarging holes.
Specification:
NA
Available forms: SMAW
Spec
Sheet
Weld Mold® 4637
- For joining and
particularly for the overlay of Udimet® alloys 500 and 520. It
has high resistance to high temperatures and impact and
maintains high strength and toughness at elevated
temperatures. Primarily used for repair and reclamation of
rapid-blow rotary forge dies. Also used for build-up and
repair of Waspaloy.®
Rc 30-35 as-welded, work-hardens to Rc 45+
Specification: DIN 2.4976
Available forms: SMAW & FCAW
 Spec
Sheet
Weld Mold® TIZ
– Weld Mold TIZ is
a grade 2 commercially pure titanium tig rod. It is used for
welding titanium and titanium alloys.
Available form:
GTAW
Spec
Sheet |
