Call Us Toll Free: (800) 521-9755

Special Maintenance Products

Special Maintenance Products

Brazing alloys, aluminum electrodes, bare cast iron rod and bare aluminum, titanium and magnesium rod. Cutting, piercing and chamfering electrodes.

Weld Mold® 11-C

A flux-coated electrode for most aluminum alloys. A special combination of core wire and extrudedcoating provides 
high-speed deposition of dense,  porosity-free welds with good color match. Weld deposits cannot be 
heat treated or anodized.
Specification: AWS-E4043
Available forms: SMAW

smaw

Weld Mold® 41-B

A bare cast iron gas-welding rod that provides excellent color match and machinability. Being a true cast iron, it does not produce hard spots caused by carbon migration as conventional welding rods do. Use with Polyflux® 41.

Specification: NA
Available forms: Oxy-Acetylene

oxy

Weld Mold® 56-B

A copper/silicon bare brazing alloy with good flow,
high strength and crack-resistance. Recommended
for thin galvanized steel and sheet metal such
as car-body repair. Also for fabrication and
repair of silicon bronze, copper alloys and grey
or malleable iron.
Specification: AWS-ECuSi
Available forms: GTAW, GMAW, Oxy-Acetylene

gtawgmawoxy

Polychamfer® 100

For chamfering, beveling and gouging ferrous and non-ferrous metals. Uses include weld preparation and removing old welds and cracks.

Available forms: SMAW

smaw

Weld Mold® 4043

A 5% silicon aluminum alloy that flows freely at 1,000 Deg. F. with excellent properties, a wide plastic range and mild corrosion-resistance. Cannot be anodized.

Specification: AWS ER-4043
Available forms: GTAW, GMAW, Oxy-Acetylene

gtawgmawoxy

Weld Mold® 5356

A magnesium/aluminum alloy that flows freely at
1,200 Deg. F. It can be used for welding most aluminum
grades and can be anodized.
Specification: AWS ER-5356
Available forms: GTAW, GMAW, Oxy-Acetylene

gtawgmawoxy

Weld Mold® 955 MCT

A bare rod used for the repair and buildup of NAK-55 superior mold steel dies in the automotive, home appliance, computer, camera, electronic and plastic film extrusion industries. It may also be used to overlay working areas of lesser alloys to provide a more wear resistant surface.

Available form: GTAW

gtaw

Weld Mold® 26-C

A flux-coated alloy with super capillary action and thin flowing characteristics. Produces extraordinary tensile and shear strength. Deep penetration of the grain boundaries on the surface of the base metal without fusion permits application with a minimum of heat and distortion.

Specification: AWS-BCuZn-A
Available forms: Oxy-Acetylene

oxy

Weld Mold® 42-C

A flux-coated low-fuming bronze brazing rod for general purpose applications. Provides excellent bonds on all metals over rust and dirt. Excellent for either thin-flowing or bead-forming applications. Also available as bare rod 42-B.

Specification: AWSR-CuZn-C
Available forms: Oxy-Acetylene

oxy

Weld Mold® 85-C

A flux-coated brazing alloy that produces a relatively tough alloy with an as-welded hardness of 220 BHN. The high nickel content produces deposits that adhere to and penetrate the grain boundaries of the base metal and produce excellent, high buildups rather than flowing out. Preferred for joining where poor fit-up is encountered.

Specification: AWS-RBCuZn-D
Available forms: Oxy-Acetylene

oxy

Polycut® 101

For cutting and piercing mild and alloy steel, stainless steel, cast iron, bronze, aluminum and copper. Uses include removing frozen bolts, piercing new holes and enlarging holes.

Specification: NA
Available forms: SMAW

smaw

Weld Mold® 4637

For joining and particularly for the overlay of Udimet® alloys 500 and 520. It has high resistance to high temperatures and impact and maintains high strength and toughness at elevated temperatures. Primarily used for repair and reclamation of rapid-blow rotary forge dies. Also used for build-up and repair of Waspaloy.®

Rc 30-35 as-welded, work-hardens to Rc 45+
Specification: DIN 2.4976
Available forms: SMAW & FCAW

smawfcaw

Weld Mold® TIZ

Weld Mold TIZ is a grade 2 commercially pure titanium tig rod. It is used for welding titanium and titanium alloys.

Available form: GTAW

gtaw