Weld MoldŽ 2209
- Used for welding duplex and super
duplex stainless steels that contain approximately 22%
chromium. 2209 is also used for joining and overlay of steel
used in chloride environments such as oil & gas industry,
chemical processing and brackish water applications.
Specification: AWS-E2209
Available forms: FCAW, GTAW
  Spec
Sheet
Weld MoldŽ 305
- Recommended for welding 630 type
stainless steel (17/4PH). Uses include joining 17/4, 15/5 and
17/7 PH grade stainless steels to themselves or dissimilar
combinations. Uses include various marine and aerospace
applications, pump parts, bolts, shafts and flexible bellows.
Specification: AWS-E630
Available forms: SMAW, FCAW, GTAW,
GMAW
  Spec
Sheet
Weld MoldŽ 309
-
Buy on line 5# Minimum
order
Recommended for welding heat-resistant
type 309 stainless steel. Also for joining types 405, 410,
430, 442, 446 when pre and post heat treatment is not
practical. This alloy is also used to join mild or carbon
steels to stainless steel. Uses include fabricating
heat-treating baskets, furnace parts and kiln linings.
Specification: AWS-E309
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 312
- Recommended for welding type 312
stainless steel. Also for welding mild, high-strength and
high-yield steels to stainless steel, plus numerous dissimilar
combinations. Uses include general fabrication of analogous
materials, tool repair and work-hardening underlays prior to
hard-facing.
Specification: AWS-E312
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 330
- For welding cast or wrought forms of
type 330 stainless steel with excellent heat and creep
resistance. Uses include the fabrication and repair of
heat-treating equipment, furnace components and many other
high-temperature applications.
Specification: AWS-E330
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 3320
- For fabricating CarpenterŽ 20 and
20CB-3. This alloy offers superior resistance to high
temperatures and chemical corrosion.
Specification: AWS-E320
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 430
- 17% chromium stainless steel alloy for
welding 430 stainless and for cladding low-alloy steels for
resistance to corrosion, oxidation and wear. Uses include the
hard-facing of steel mill rolls. Also overlays of gas, water,
and steam valves subject to service temperatures of up to
850F. Pre and post heat treatment recommended.
Specification: AWS E-430
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
|
 |
Weld MoldŽ 2553
- This electrode is primarily
used for welding duplex stainless steels, which contain
approximately 2 5% chromium. Suited for offshore oil fields.
Also used on Ferralium 255.
Specification: AWS E-2553
Available forms: GMAW
Spec
Sheet
Weld MoldŽ 308
- Recommended for welding types
201, 202, 301, 302, 304, 305 and 308 stainless steels. This
alloy provides moderate resistance to general corrosion. Uses
include the joining of dairy, brewery, restaurant and chemical
equipment.
Specification: AWS-E308
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 310
- Recommended for welding base
metals of a similar composition. This alloy is also used to
weld types 309, 311, 314 and 446 stainless steel alloys as
well as dissimilar metals such as high-carbon steel, stainless
armor clad and air-hardening types 405, 410 and 430. Uses
include fabrication of high-pressure boiler tubes, overlays
and casting repair.
Specification: AWS-E310
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 316
-
Recommended for welding type
316 stainless steel and other alloys requiring
high-temperature service. The addition of molybdenum reduces
pitting by some acids and enhances elevated-temperature
properties. Uses include fabrication and cladding in the
petroleum, paper and chemical industries for piping, pulp
digestors, tanks and vats.
Specification: AWS-E316
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
Weld MoldŽ 3315
- For superior galling and wear
resistance. Its corrosion and pitting resistance is better
than 304 and 316 types stainless. It also provides excellent
high temperature oxidation resistance and low temperature
impact resistance.
Specification: AWS E-3315
Available forms: SMAW
Spec
Sheet
Weld MoldŽ 420
-
A 13% chromium martensitic
stainless alloy for welding 420 stainless and for cladding
low-alloy steels for resistance to corrosion, wear, oxidation
and erosion. A universal alloy for cladding and hard-facing
many types of steel-mill rolls and components as well as
plastic molds and die-casting dies. Pre and post heat
treatment is recommended.
Specification: AWS-E420
Available forms: SMAW, FCAW, GTAW,
GMAW
Spec
Sheet
|
