800.521.9755

Since 1945

Mild and Low-Alloy Steel Weld Materials


Fabrication and maintenance of mild, low-alloy and high-strength steel.


Weld Mold® 200


A versatile, general-purpose, all-position low-alloy steel electrode designed and developed for production and maintenance welding of mild steel. Uses include fabrication and maintenance welding of sheet metal ducts, tanks, culverts, pipe, plate and angle iron.
Specification: N/A
Available forms: SMAW, GTAW, GMAW

Weld Mold ® 201


Weld Mold 201 is an all position electrode that produces x-ray quality welds. Designed specifically to give deep penetration where access does not permit proper cleaning prior to welding. Weld Mold 201 will satisfactorily weld over limited amounts of rust, dirt, and other foreign substances.


Weld Mold ® 202


A low-hydrogen, chrome/nickel/moly alloy for high-strength, crack-resistant weld deposits. Uses include the joining of T-1, HY 80/90 steels and “problem” steels containing sulphur, graphite or other elements to improve machinability.
Specification: N/A
Available forms: SMAW, FCAW, GTAW, GMAW

Weld Mold® 204


A high-speed, medium-penetration iron-powder electrode for steel fabrication with low spatter, excellent slag removal and easy re-strike. Uses include all types of mild-steel fabricating, poor fit-up joining, plate, tanks and beams.
Specification: N/A
Available forms: SMAW


Weld Mold® 205


Weld Mold 205 is a high speed, all position electrode with a specially developed coating containing iron powder to assist in faster weld deposition. Formulated for higher tensile strength than Weld Mold 204, low penetration for poor-fit-up and easy restrike characteristics make this electrode a versatile welding product.
Specification: N/A
Available forms: SMAW

Weld Mold ® 210


A unique alloy designed to join crack-sensitive sections of 4130 and 4140 steels. Also used for the repair and buildup of cracked sections of P-20 mold steel. Uses include buildup, fabrication and low-hardness overlays.
Specification: AWS-E80S D2
Available forms: SMAW, GTAW, GMAW


Weld Mold® 215-T CM


A versatile, high-strength chrome/moly alloy used to join and repair alloys of approximately the same analysis. Other uses include fabrication of race- and stock-car components, pressure vessels, high-pressure pipe, cast and wrought sections of chrome/moly base metal. Also available as a composite electrode.
Specification: AWS-ECuNiAl
Available forms: SMAW, GMAW

Weld Mold ® 225-T CM


Similar to 215-T CM, except chrome/moly alloy content is increased, exhibiting higher physical properties. Uses include fabrication and repair of chome/moly alloys of approximately the same analysis; power piping and boiler maintenance.
Specification: AWS-E90S-B3
Available forms: SMAW, GTAW, GMAW


MEMBERSHIPS


SOCIAL MEDIA


     



Copyright © 2024 All rights reserved

CONTACT US


800.521.9755

810.229.9521

810.229.9580 fax

750 Rickett Road
Brighton, MI 48116 USA

MAP US